Standard PAT Adhesive Applicator for Glue/Adhesive Extrusion at Gluefast

Phone: 1-800-242-7318 or 1-732-918-4600

Home

Gluefast's Standard PAT, Pneumatic Adhesive Tank

Gluefast Standard PAT

The Gluefast Standard PAT Adhesive Applicator for Glue/Adhesive Extrusion

For applications requiring manual dispensing of water based glues or adhesives, rely on the Gluefast standard PAT (Pneumatic Adhesive Tank) Adhesive Applicator, which offers unmatched portability, versatility, and efficiency. PAT adhesive and gluing applicator directly applies adhesives on any substrate for case and carton sealing, wood working, and other precision applications. The Gluefast PAT glue applicator is available with interchangeable glue heads to extrude a bead or line of glue or with the PAT Sprayer for precise adhesive application every time.

What is the Standard PAT Adhesive Applicator?
The standard Pneumatic Adhesive Tank (PAT) from The Gluefast Company, Inc includes a pressure tank, air gauge assembly, and glue line assembly with push button valve to dispense most water based glues and adhesives with a viscosity up to 6,000 cps.

The PAT requires an air-line to pressurize the tank, but if air is not available at the point of application you can fill the tank half-full with adhesive and then pressurize the tank to use in remote locations.

How Does the Standard PAT Adhesive Applicator Work?
PAT is totally self-contained, complete with stainless-steel tank, pressure gauge and regulator, handgrips, rubber hose and safety relief valve. PAT is simple to use and easy to handle. Just fill the tank with water-based glue or adhesive and air (10-90 psi) and you’re ready to dispense adhesive with the controlled amounts you desire. Interchangeable glue heads are available to spread the adhesive up to 3” wide. Special heads are also available for dispensing a single dot or line of adhesive for woodworking. Optional glue-control needle valve recommended when PAT is not connected to an air supply.

Standard Features:

Stainless steel tank
Pressure gauge & regulator
Safety relief valve
Rubber hose, handle, push button glue valve

Optional Features:

1", 2", or 3" wide glue heads
Glue heads for applying a dot or line of glue
Glue control needle valve
Optional PAT sprayer attachment

Contact a Gluefast representative at 1-800-242-7318 or email us to determine if the PAT adhesive applicator is the optimum piece of equipment for your adhesive system.

Proud member of the Packaging Machinery Manufacturer’s Institute (PMMI).
PMMI sponsors PACK EXPO, America's largest packaging show.
Gluefast has exhibited at PACK EXPO for over 30 years!

Website Design by Dynamic Digital Advertising

Glue Dots ® from Gluefast are the perfect solution when you need an adhesive that holds tight, can remove easily, and leaves no mess behind. As effective pressure sensitive adhesives, Glue Dots ® are safer and faster than hot melt glues and leave no messy or sticky residue behind, like industrial adhesives or double-sided tape. Also referred to as fugitive or booger glue, Glue Dots ® are available in three different thicknesses, referred to as profiles, ranging from low (the standard), 1/64th inch thick, medium, 1/16th inch, and high, 1/8th inch. It’s easy to get the exact hold you’re looking for from easy-to-remove to semi-permanent, with four different tack strengths available, ranging from low, medium, high, and super high. A Glue Dot ® is perfect for professional and home uses. These products are regularly used in companies and businesses like Pharmaceutical Packaging, Promotional Packaging and Bundling, Printing and Bindery, Direct Mail, and Crafts, Scrapbooking, Greeting Cards and card making.